HiFinance 5


 

SECTION 7.2.3.5.1 - ADD A NEW CARRIER

 

USAGE: To add a new Fuel Carrier to the Carriers master-file. This option is only relevant if you are using the Fuels option. You must add at least one fuel for the system to work. These Carriers are different to the Gas Delivery Carriers. They can be setup as required. They must, however already exist as a Creditors. The secondary function is to attach Trucks to the Carrier. Unless these two things are done, the Carrier cannot be used in the Deliveries program.

 

DISCUSSION: When you start this function, the computer will initially ask for an Creditor code. Insert a code and press <Enter>. The Creditor must already exist in the Creditor master file. If you do not remember the Creditor’s code, press <F9> to initiate a search.

 

HiFinance will then ask you to confirm your entry and then the table header will be created for that Carrier. You will then be shifted to the same screen as in MODIFY TABLE, where you can enter Fuel’s information. (see SECTION 7.2.3.5.2.)

 

To return to the FUELS TABLE MENU, press <ESC>.

Return to Table of Contents  Return to Table of Contents