HiFinance 5


 

SECTION 7.2.3.4.4 - FUELS LIST

 

USAGE: To produce a list of all or a range of Fuels together with their component information. The report is always printed in Fuel code order. This report is only relevant for those sites that are using the Fuels option.

 

DISCUSSION: If you have chosen to allow short and long form reports, you will be asked USE LONG FORMAT REPORT? Choose the form you wish by entering Y or N.

 

Next you will be asked, INCLUDE ALL FUEL TYPES? If you enter Y all Fuels on file will be included and no further questions will be asked. (Go to the START REPORT question.) If you press <ESC> you will return to the FUELS TABLE MENU.

 

If you enter N to the above question, the following series of questions will appear:

 

FROM FUEL CODE This is the lower limit of the Fuel code. Here you enter the code of the first Fuel you wish printed. The default answer is blank. This will start printing from the start from the first Fuel.

 

TO FUEL CODE  This is the upper limit of the Fuel code. Here you enter the code of the last Fuel you wish printed. The default answer is zzzzzzzzzzzzzzz. This will end printing at the last Fuel. This entry must not be less than the starting Fuel code. If you choose the default for both questions all Fuels will be included.

 

At each point when answering the above questions, you can press <ESC> and the program will reset and return you to the FUELS TABLE MENU.

 

When you have entered all the above information, press <F10> and you will be asked, START REPORT? If you answer N, the program will reset and return you to the beginning. If you enter Y, the screen will clear and the Inventory master-file will be read in. During this time the computer will be selecting Fuels according to the selection criteria you have just entered and will generate the report.

 

When the report has completed, HiFinance will return you to the FUELS TABLE MENU.

 

The selection criteria are printed in the heading lines of the report. The report itself will detail the Fuel code and Description. If the Fuel is a blend, the components will be listed, with their percentages.

 

At the end of the report, the total of Fuels printed in this run will be printed.

Return to Table of Contents  Return to Table of Contents